Loader water tank maintenance in hot weather

As temperatures rise, are your loader equipment tanks maintained as per maintenance requirements? This can better protect the water tank and prevent the high temperature of the water tank from affecting the normal operation of the equipment:

 Liugong CLG855N wheel loader on sale by CCMIE

1. Just rinse the radiator outside the water tank with water with a little pressure. The water pressure should not be too high, otherwise the radiator will be deformed. However, the surroundings of the radiator on the front and back of the water tank must be cleaned.
2. Start the loader for about 5 minutes first, turn off the water when the water temperature is 30 degrees, and drain the water from the water tank; after draining, turn off the water switch and refill the water; restart it for a few minutes, then drain the water; and so on. Just wait until the released water is clear. Remember not to add water to the water tank after cleaning, but antifreeze.
3. During normal use of the loader, do not open the water tank cover after parking, as steam will erupt from the water tank and cause burns.
4. Antifreeze must be added to the water tank. If the water tank is filled with water, scale will easily form, causing the pipes in the water pipe box to be blocked, resulting in poor water return and high temperatures.

CCMIE is not only an excellent second-hand equipment supplier, but also an excellent spare parts supplier. If you need a second-hand loader or related loader spare parts, you can contact us.