Used hydraulic Lishide SC210.9 crawler excavator

Product Introduction

Lishide SC210.9 is equipped with the world-class power system and hydraulic system of Zhongchuan medium-sized excavator, which is easy to use and maintain, low fuel consumption and low noise. Excellent configuration and excellent detail design achieve the perfect combination of stability and work efficiency. SC210.8E excavator has an early warning function, which greatly reduces user maintenance costs; high-strength structural parts ensure that the excavator can adapt to various working conditions. The cab adopts high-strength frame structure and all-round adjustable suspension seat, creating a safe and comfortable working space for customers.

Product features

1. Energy saving: It is driven by electricity. Under the same conditions, the cost of electricity is more than 50% lower than that of fuel, and the efficiency is higher. 2. Safety: The use of explosion-proof motor greatly improves the safety of operation. 3. Environmental protection: avoid the pollution caused by waste discharge under the working state of the internal combustion engine, zero emission, no need for engine maintenance and maintenance, reduce working noise, and be more environmentally friendly. It truly interprets the connotation of green construction. Electric excavators are suitable for relatively fixed construction sites, such as scrap steel mills, docks, biological power plants, large mining areas, etc. In addition to normal excavation operations, it can also cooperate with various attachments such as hydraulic shears, suction cups, and grabbers for construction operations. Precautions for excavator operation: 1. Check before operation to confirm that everything is complete and intact, there are no obstacles and other personnel within the range of movement of the boom and bucket, and the operation can only be started after sounding the whistle to warn. 2. When excavating, the soil should not be too deep each time, and the lifting bucket should not be too strong, so as not to damage the machine or cause overturning accidents. When the bucket falls, be careful not to impact the track and frame. 3. Those who cooperate with the excavator to clean the bottom, level the ground, and repair the slope must work within the turning radius of the excavator. If it is necessary to work within the slewing radius of the excavator, the excavator must stop turning and brake the slewing mechanism before it can work. At the same time, people on and off the plane must take care of each other and cooperate closely to ensure safety. 4. Vehicles and pedestrians are not allowed to stay within the range of excavator loading activities. When unloading materials on a car, wait until the car stops and the driver leaves the cab before turning the bucket and unloading materials on the car. When the excavator is turning, try to avoid the bucket from passing over the top of the cab. When unloading, the bucket should be lowered as much as possible, but be careful not to hit any part of the car. 5. When the excavator is slewing, the slewing clutch should be used to cooperate with the slewing mechanism brake to rotate smoothly, and sharp slewing and emergency braking are prohibited. 6. Before the bucket leaves the ground, it is not allowed to turn, walk and other actions. When the bucket is fully loaded and suspended in the air, it is not allowed to lift the boom and walk. 7. When the crawler excavator is moving, the boom should be placed in the forward direction of travel, and the height of the bucket from the ground should not exceed 1 meter. And brake the slewing mechanism.